OUTDOOR HD PRO

A compact weatherproof HD security camera with night-vision and FREE 7 day video cloud storage1 of motion-activated HD video clips.

Supports both Wi-Fi and Wired connections.

  • Weatherproof HD Security Camera System (Wi-Fi or Wired)

  • FREE 7 day video cloud storage1

  • Safe and Secure

  • Quick & Easy set up

  • Relevant Notifications

  • Access on the go



How to Install Outdoor HD Pro

  • Connect to router and power source. 

In the app:

  • Hamburger-menue → Cameras

    • Click configure-wheel(manage cameras)

    • Add new camera with the +.

    • Choose Outdoor HD Pro

    • Wait for green LED

  • Click next to scan for camera

    • Fill in Camera name

    • Camera ID(frontpage of the manual)

    • Choose timezone

  • Click next to add camera to account

    • camera will scan for wifi(if you want to use ethernet you can skip)

  • Choose wifi and fill in password

    • wait for camera to connect to wifi

  • Add motion zone and sensitivity

How to configure Outdoor HD Pro

  • Hamburger-menue → Cameras

    • Click configure-wheel(manage cameras)

  • Choose configure for the camera

    • Set Camera name

    • Choose timezone

    • Audio

      • On/off

    • Motion recordings

      • On/off

    • Night vision: 

      • On/off/auto

    • Stream quality: 

      • Standard/High definition

    • Wi-fi settings: 

      • Click to setup

    • Motion zones: 

      • Click to setup

  • Click apply to save settings for camera

Resetting is needed if you want to connect your camera to another gateway or if you need to perform a factory reset to remove abnormal behaviour.

  1. Hold the button  on the back for 10-15 seconds until the LED blinks red.(this erases all settings on the camera and you have to connect it with ethernet again) 

  2. To be able to add the camera to a new gateway you also MUST remove the camera from the app so the camera are not registered to the cloud .

Faults/Modes

  • Error! camera with id already in use

    • Remove from app to remove cloud-connection, try again

  • Green LED

    • Online

  • Green LED blinking

    • Sending video

  • No Led light

    • Power are not on

  • Red LED

    • this generally means the camera is offline and is attempting to establish a connection to our servers.

      • Your camera has only just been switched on(<5min)

      • The camera may be unable to connect to your network

      • Your Internet connection may be offline

      • Check your Wi-Fi network is working – can other devices access the Internet?

      • Is your internet speed or network being used for something else? Internet TV, torrents or other heavy usage may temporarily affect connectivity.

      • Try turning the camera off – remove the plug at the wall, wait 10 seconds, then reconnect – after 60 seconds or so, does the camera reconnect?

      • Try rebooting your router - this can help restore your camera’s Internet connection.

      • Check that your camera is in range of your Wi-Fi network – temporarily move it closer and see if this makes a difference.

      • WEP are not recommended on the router, wpa or wpa2 are to be used for optimal performance.