• Accurate power consumption measurement

  • Patented 'Dual Sensor Technology' for accurate temperature control

    • supported logics: 

      • climate control 

      • generic(not in use atm)

How to Install/Pair a Radiator Valve

  • Open the casing of the device. Unscrew the screw with a philips screwdriver. 

  • Start the search in the app

  • Plant the enclosed battery into the device 

  • The Radiator valve will start searching (up to 15 minutes) for a network to join.

  • While searching for a network, the LED on the is flashing*.

    • not showing up in search? 

      • Start search in app

      • Follow the reset routine

How to configure a Radiator Valve

  • Click configure on the Radiator Valve after scanning for new devices

  • Add a device name

  • Add the device to a room

    • Select the room you want from the list or add a new room

  • Enter details for: Thermostat

    • Add the application: Climate control

      • choose usage option: 

        1. Heating device

        2. Cooling device

Resetting Resetting is needed if you want to connect your radiator valve to another gateway, if you need to perform a factory reset to remove abnormal behaviour, or if you need to reset accumulative registers and logs.

  1. Press and hold down the button on the device approximately 20 seconds.. 

  2. Hold the button down until the red LED flashes continuously, then release the button.