OSRAM LIGHTIFY


Light bulbs with GU10 or E27 socket and lightstrip etc.

How to Install/Pair Osram Lightify 

  1. Screw the bulb in place

  2. Make sure that the bulb has power (toggle the power switch if necessary)

  3. Start the scan for new devices in the app

How to configure Osram Lightify lights

  • Click configure on the light bulb after scanning for new devices

  • Set the device name

  • Add the device to a room

    • Select the room you want from the list or add a new room

  • Set the application

Application types

  • Light - The bulb will be is controlled as part of the room. E.g it will react to the changes you make to light in the whole room. 

  • Generic  - The  light bulb is controlled separate from the rest of the room.

Reset the light bulb:


Step 1:  Start with the Tunable lightbulb powered ON.

Step 2:  Turn it OFF for 5 seconds. 

Step 3:  Turn it ON for 5 seconds.

Step 4:  Turn it OFF for 5 seconds.

Step 5:  Turn it ON for 5  seconds.

Step 6:  Turn it OFF for 5 seconds.

Step 7:  Turn it ON for 5 seconds.

Step 8:  Turn it OFF for 5 seconds.

Step 9:  Turn it ON for 5 seconds.

Step 10:  Turn it OFF for 5 seconds.

Step 11:  Turn it ON and leave it ON.


The lightbulb should blink 2 times to show a successful reset and ready for pairing.

Troubleshooting:

  • The light bulb flashes three times in regular intervals - This is an indication that the security alarm has been activated on your system. Resolve the alarm to stop the flashing.

  • The light bulb never turns on - The light bulb is defect and must be replaced.

  • The light bulb is not found during scan - follow the reset routine and try to scan for the device..