Light bulbs with GU10 or E27 socket and lightstrip etc.

HUE, all types on scandinavian market

How to Install/Pair Philips Hue lights

  1. Screw the bulb in place

  2. Make sure that the bulb has power (toggle the power switch if necessary)

  3. Start the scan for new devices in the app

How to configure Philips Hue lights

  • Click configure on the light bulb after scanning for new devices

  • Set the device name

  • Add the device to a room

    • Select the room you want from the list or add a new room

  • Set the application

Application types

  •  Light - The bulb will be is controlled as part of the room. E.g it will react to the changes you make to light in the whole room. 

  • Generic  - The  light bulb is controlled separate from the rest of the room.

Reset the light bulb:

  • Needs Hue remote or reset of the Hub. If Hue remote, hold top and bottom button while holding the remote close to the bulb.


  • The light bulb flashes three times in regular intervals - This is an indication that the security alarm has been activated on your system. Resolve the alarm to stop the flashing.

  • The light bulb never turns on - The light bulb is defect and must be replaced.

  • The light bulb is not found during scan - follow the reset routine and try to scan for the device..